6' Aluminum Channel for LED systems

Lets Go Shop!

Buttons below are collapsed, click to open.

MJ Channel

MJ Channel/Track

Modified J channel is a low cost alternative that we use on our installs. The 3/4 inch profile works in so many different areas. It allows lights to face outward (like traditional Christmas Lights) or downward (to reflect off your home called Wall Wash). It's designed to be installed under eaves, soffits, gutter systems and fascia under drip edge.

MJ Channel is 74" lengths but sold as 6'. PixelLights 6' light cable fits this channel by snapping each pixel in 8 holes spaced 9' apart.

Now the channel is ready to be installed. Prep as many needed for long runs making sure the direction of the cables is correct coming out of the controller.
(Works with both PixelLights and EverLights)

Many available colors to match your projects

J Channel

J Channel/Track

Econo J Channel lays flat on top of the gutter lips and flat edge roof caps that can be used for commercial jobs too. Econo meaning low cost, so you can make you more money with installs.

J Channel comes in 74-5/8" inch lengths so Pixellights 6' light cables fit inside this channel by snapping each pixel in the 8 pre drilled holes spaced 9' apart.

Application Uses:
- Flat Roof caps
- Top Gutter lips

Now the channel is ready to be installed. Prep as many needed for long runs making sure the direction of the cables is correct coming out of the controller. (Works with both PixelLights and EverLights)

Many available colors to match your projects

It is recommended to get a couple of extra pieces in case of a bad cuts or an accidentally damaged piece during installation. All sales are final so be sure of the color prior to ordering.

FM Channel (upgrade)

Our Flush Mount channel is an upgrade that looks amazing with PixelLights low profile pixels/bulbs and blends well on the fascia face mount. Also can be used under gutter if there space to fit. This is perfect for HOA approval as it is unseen during the day. Flush mount comes in 74" inch lengths, but sold as 6'ft for extra overlap or triming.

PixelLights 6'ft LED light cable fits in this channel by snapping each pixel in to the 8 holes that are spaced 9" apart. Now the channel is ready to be installed. Prep as many needed for long runs making sure the direction of the cables is correct coming out of the controller

Flush Mount (FM)

Application Uses:
- Under Drip Edge
- Underneath Gutters

Stock Colors (White - Black)

Now the channel is ready to be installed. Prep as many needed for long runs making sure the direction of the cables is correct coming out of the controller.
NOTE: @9" spacing works with both PixelLights & EverLights

Other colors available to match project needs (special order)

It is recommended to get a couple of extra pieces in case of mistakes, a bad cuts, or an accidentally damaged piece during installation. All sales are final so be sure of the color prior to ordering.

Channel Assembly Required